Key takeaways
- Five faucet aerators for kitchen and bathroom sinks, from hidden cache inserts to a swivel sprayer, with thread sizes and flow rates explained.
Disclosure: As an Amazon Associate, I earn from qualifying purchases. If you buy through links in this article, I may earn a commission at no extra cost to you.
Our top pick: Neoperl Tom Thumb PCA Cache Aerator, 1.5 GPM, 2-Pack. Runner-up: Delta RP330 Aerator, 2.2 GPM, Chrome.
A faucet aerator is the small fitting screwed onto the tip of a spout. It mixes air into the water stream, so the flow feels full and soft instead of arriving as a hard jet, and it sets how much water the faucet passes. When a stream turns into a sideways spray or the flow drops to a trickle, the fix is usually this one small part, not a new faucet.
The catch is fit. Aerators come in male and female threads, in several common diameters, and in flow rates from low-flow bathroom models to full-flow kitchen ones. Some are plain replacement caps, some are swivel sprayers, and some are hidden cache inserts that sit inside the spout and need a key to remove. Buy the wrong thread and the part will not screw on at all.
How to Choose a Faucet Aerator
Thread type. Unscrew the old aerator first. Threads on the outside of the spout mean the spout is male and needs a female aerator; threads on the inside mean the spout is female and needs a male aerator. Dual-thread aerators and adapters cover both.
Thread size. The two common sizes are 15/16-inch, about 24 mm and usually a male aerator, and 55/64-inch, about 22 mm and usually a female aerator. Many newer faucets use hidden cache inserts in smaller sizes, such as M16.5, M18.5, and M21.5, which need a key to remove.
Flow rate. Flow is measured in gallons per minute, or GPM. Standard replacements are often listed at 2.2 GPM, the federal maximum for faucets. For a bathroom sink, 1.5 GPM or lower saves water with little difference at the basin.
Spray behavior. A plain aerator gives one aerated stream. Swivel aerators add a spray mode and rotation, which helps rinse the corners of a large kitchen sink. A swivel only works on a faucet with a removable aerator, not on a pull-down sprayer.
Material and certification. Solid brass shells hold their thread better than plastic and resist cross-threading, while ABS plastic is light and does not corrode. NSF/ANSI/CAN 61 relates to drinking water components, and cUPC relates to plumbing code listing.
An aerator is not a water filter: faucet-mounted filters are a different part, and none of the picks below filters water.
1. Neoperl Tom Thumb PCA Cache Aerator, 1.5 GPM, 2-Pack
Neoperl makes aerators for a large share of the faucets sold worldwide, and its cache inserts are the standard replacement for hidden-thread spouts. This two-pack is the Tom Thumb size, with an M16.5 x 1 thread, a listed flow of 1.5 GPM, and a honeycomb screen in place of a conventional wire mesh. A tool key is included, which matters because a cache insert sits inside the spout and cannot be removed by hand.
The 1.5 GPM flow suits a bathroom basin: noticeably less water than a standard 2.2 GPM fitting, without the thin stream of an ultra-low-flow part. The pressure-compensating design, which Neoperl calls PCA, uses an integral flow regulator to hold the flow steadier as household water pressure changes. Before ordering, confirm that your spout takes a Tom Thumb cache insert in M16.5 x 1; a Junior or Tiny Junior insert is a different size.
Specs
- Type: Hidden cache insert aerator, Tom Thumb size
- Thread: M16.5 x 1
- Flow: 1.5 GPM listed
- Screen: Honeycomb screen
- Pack: 2 aerators with tool key
- ASIN: B07G4FC2HG
2. Delta RP330 Aerator, 2.2 GPM, Chrome
The RP330 is Delta’s own replacement aerator for its Classic kitchen and lavatory faucets, and it is the simplest fix when a Delta faucet starts spraying sideways. A genuine part removes the guesswork about thread pitch, gasket size, and how far the fitting sits from the spout.
The thread is a 15/16-inch male thread, the common 24 mm size, which screws into a spout with threads on the inside. The listed flow is 2.2 GPM at 60 psi, the standard faucet maximum, and the finish is chrome. One detail deserves care: the retail listing gives the thread pitch as both 27 and 22 in different lines, so if your faucet is not a Delta Classic, compare the old aerator with the new one rather than relying on the number alone.
Specs
- Type: OEM replacement aerator
- Thread: 15/16-inch male
- Flow: 2.2 GPM at 60 psi listed
- Finish: Chrome
- Fits: Delta Classic kitchen and lavatory faucets
- ASIN: B000BOC5GM
3. Danco 10493 Dual-Thread Aerator, 1.5 GPM
The most common aerator mistake is buying the wrong thread, and the Danco 10493 avoids it by having both. The listing gives the thread sizes as male 15/16-inch-27 and female 55/64-inch-27, the two standard sizes, so the same aerator screws into a spout with inside threads or onto one with outside threads.
The listed flow is 1.5 GPM, which makes this the water-saving pick among the standard threaded aerators here. At a bathroom sink, that flow feels close to a full-flow fitting while using roughly a third less water than a 2.2 GPM part. The dual-thread design is also the practical choice when you are replacing aerators on several faucets and do not want to take each one apart twice to check the thread.
Specs
- Type: Dual-thread replacement aerator
- Thread: Male 15/16-inch-27 and female 55/64-inch-27
- Flow: 1.5 GPM listed
- Finish: Chrome with blue insert
- Fits: Standard kitchen and bathroom faucets
- ASIN: B008OCHBBC
4. Moen 3924 Aerator, 2.2 GPM, Female Thread, Chrome
When a Moen faucet starts spraying sideways, the simplest fix is the part it came with. The 3924 is Moen’s own OEM replacement aerator, and Moen says it ensures reliable performance and quality from the original manufacturer. Generic aerators often fit, but a genuine part removes the guesswork about thread pitch, gasket size, and how far the fitting sits from the spout.
Moen lists the flow at 2.2 GPM, the standard maximum for faucets. The thread is female, so it screws onto a spout with threads on the outside. The chrome finish matches Moen’s chrome faucets, and Moen lists the part as meeting Americans with Disabilities Act specifications for accessible use. Moen backs the aerator with its limited lifetime warranty, which no generic aerator here matches. Before buying, check that your faucet is a Moen with a female-thread aerator; the listing does not give the diameter, and Moen sells a male-thread version too.
Specs
- Type: OEM replacement aerator
- Thread: Female
- Flow: 2.2 GPM listed
- Finish: Chrome
- Compliance: ADA compliant as listed
- Warranty: Moen limited lifetime warranty
- ASIN: B0008516RI
5. Hibbent 360-Degree Swivel Faucet Aerator, Dual-Function
A fixed kitchen spout sends water to one spot, which makes rinsing the corners of a large sink harder than it needs to be. Hibbent’s swivel aerator fixes that: it rotates 360 degrees, and turning it switches between a soft aerated stream and a strong spray. Hibbent describes it as compatible with kitchen sinks, bathroom taps, and lavatory faucets.
Certifications are where this pick stands apart. Hibbent’s listing says the aerator has NSF/ANSI/CAN 61 certification and cUPC certification, and describes it as crafted from low-lead materials. For a part that sits on the end of the tap you fill glasses and kettles from, a stated drinking-water certification is a meaningful difference from most swivel aerators, which list none. The aerator has a 55/64-inch female thread, and Hibbent includes a female-to-male adapter for spouts with inside threads. No GPM figure is listed, so if flow rate is your main concern, the Danco or the Neoperl cache insert states it and this one does not.
Specs
- Type: Swivel aerator, 2 modes
- Thread: 55/64-inch female, female-to-male adapter included
- Modes: Soft aerated stream and strong spray
- Rotation: 360 degrees
- Certification: NSF/ANSI/CAN 61 and cUPC as listed
- Material: Metal swivel ball, chrome finish, low-lead as listed
- ASIN: B01LCPX9AO
Comparison Table
| Aerator | Thread | Flow | Best for |
|---|---|---|---|
| Neoperl Tom Thumb PCA Cache, 2-pack | M16.5 x 1 cache insert | 1.5 GPM listed | Hidden-thread spouts |
| Delta RP330 | 15/16-inch male | 2.2 GPM at 60 psi listed | Delta Classic faucets |
| Danco 10493 | Dual-thread 15/16-inch and 55/64-inch | 1.5 GPM listed | Unknown thread type |
| Moen 3924 | Female | 2.2 GPM listed | Moen faucets, original part |
| Hibbent 360 swivel | 55/64-inch female, adapter included | Not listed | Kitchen rinsing and spray |
Frequently Asked Questions
How do I know which thread my faucet has?
Unscrew the old aerator and look at the spout. Threads on the outside mean the spout is male and needs a female aerator; threads on the inside mean the spout is female and needs a male aerator. If the aerator sits hidden inside the spout, it is a cache insert, and you need its size class and removal key.
What is the difference between a cache aerator and a standard aerator?
A standard aerator screws onto the outside of the spout or into its end with a visible thread in one of the two common sizes. A cache aerator is an insert that threads into the inside of the spout and sits flush, so it needs a matching housing and a key to remove.
Will a 1.5 GPM aerator feel weak?
At a bathroom sink, usually not: a 1.5 GPM aerator mixes air into the stream, so the flow feels fuller than the number suggests. In a kitchen where you fill large pots, a 2.2 GPM fitting is the more practical choice.
How often should I clean or replace a faucet aerator?
When the stream turns uneven, sprays sideways, or drops to a trickle, the screen is usually clogged with sediment or scale. Unscrew the aerator, rinse the screen, and soak it in white vinegar to dissolve mineral buildup. If the screen is torn or the shell is cracked, replace the part.
Can I put a swivel aerator on any faucet?
No. A swivel aerator needs a faucet with a removable aerator in a matching thread, and it adds length below the spout, so check the clearance above the sink. It will not fit pull-down sprayers or faucets with built-in filters.
Conclusion
Start by unscrewing the old aerator and matching its thread, size, and type. If your spout takes a hidden cache insert, the Neoperl Tom Thumb two-pack is the direct replacement, with a key in the box and a water-saving 1.5 GPM flow. If you own a Delta Classic or a Moen faucet, the RP330 and the 3924 are the original parts for those spouts. If you do not know your thread type, the dual-thread Danco 10493 covers both standard sizes at 1.5 GPM. And if the problem is reach rather than flow, the Hibbent swivel adds a spray mode and full rotation to a fixed spout.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountAs an Amazon Associate we earn from qualifying purchases.





Write Your Review
No reviews yet. Be the first to share your experience!